Mulch calculator

Enter your beds and get the number you actually need to buy: cubic yards, whole bags, what it will weigh and what it will cost. Add as many beds as you like, each with its own shape and depth. Everything is worked out in your browser.

Bed 1

ft
ft
in

Cubic yards——
Bags needed——
Total area—at the depths set above
Approx. weight——

Hardwood mulch soaks up water and holds it. A yard that weighs around 500 lb dry can pass 800 lb after heavy rain, so weigh the wet figure when you are checking a pickup payload.

Bag size, prices and delivery
$
$
$

I already have material — how far does it go?
cu yd
in

How the calculation works

Mulch is sold by volume, but beds are measured by area, and the step between the two is the depth. Three multiplications get you there:

  1. Area. Length times width for a rectangle, π times the radius squared for a circle, half the base times the height for a triangle. A ring is the outer circle minus the inner one.
  2. Volume in cubic feet. Area in square feet times the depth in feet — which is the depth in inches divided by 12. A 200 sq ft bed at 3 inches is 200 × 0.25 = 50 cubic feet.
  3. Cubic yards. Divide by 27, because a cubic yard is a three-foot cube. Those 50 cubic feet are 1.85 cubic yards.

The 27 is exact and so is the 12, which means the volume figures on this site carry no rounding beyond what you see. Weight and price are a different matter, and we are explicit about that below.

Which number does the supplier want?

The same quantity of mulch gets quoted four different ways depending on where you are buying it. This is what to give each of them:

What you are looking atWhat to use
A pallet of bags at a big-box storeThe whole-bag figure — round up, never down
A bulk yard quoting "per yard"Cubic yards, rounded to the nearest half yard
A supplier quoting "per ton"The tonnage, and ask them which moisture it assumes
A landscaper asking for the areaSquare footage and the depth you want
Your own pickup truckThe weight — a yard of wet hardwood is a serious load

How deep to lay it

Depth is the input people get wrong, and it changes the answer more than the bed measurements do — doubling the depth doubles the order.

  • 2 inches — established beds that are already dense, or over bulbs that have to push through.
  • 3 inches — the usual answer, and the depth most coverage figures assume.
  • 4 inches — new beds, or where weed suppression is the whole point.
  • More than 4 inches — rarely useful in a bed. It holds water against stems and stops rain reaching the roots. The exception is playground surfacing, where depth is a fall-height safety decision and runs to 9 inches or more.

Around a tree, the depth matters less than the gap: keep mulch several inches clear of the trunk rather than heaping it against the bark. Seemulch and termites for why that clearance matters against a house wall too.

Why we add a waste allowance

The calculator adds 10% by default. That is not padding — beds settle, shapes measured by pacing are never exact, and the last bag always seems to fall a few square feet short. Running out halfway through a Saturday costs a second trip; a surplus bag gets used somewhere.

The allowance is applied to the volume, before the bag count is worked out, which is why the bulk and bagged figures on the screen always agree with each other. Applying it to the bag count instead — which some calculators do — makes the two answers drift apart.

Bags or bulk

Per cubic yard, bulk is always cheaper. The thing that decides it is the delivery fee, which is flat: it costs the same whether you take one yard or six. Below roughly two to three yards that fee swamps the saving. Above it, bulk wins and keeps winning.

The other half of the decision is not money. Bulk arrives as a pile on your driveway that has to be moved by wheelbarrow, and it has to be moved fairly soon. Bags can sit in the garage until the weekend you actually have. The calculator reports wheelbarrow loads for exactly this reason — see how much a yard of mulch costs for worked examples.

About the weight figures

Every weight on this site is given as a range, with the reason it moves. That is deliberate. A cubic foot of shredded hardwood might weigh 18 lb dry and 30 lb after heavy rain, and a single number would be wrong most of the time in one direction or the other. Publishing the spread and its cause is more useful than a confident average.

Volumes, by contrast, are exact. Where this site prints a coverage or conversion figure, it is arithmetic rather than an estimate, and theconversions page shows the working.

Questions

How much mulch do I need?

Multiply the bed's area in square feet by the depth in inches, then divide by 12 to get cubic feet, and by 27 again to get cubic yards. A 200 sq ft bed at 3 inches needs 50 cubic feet, which is 1.85 cubic yards, or 25 bags at 2 cubic feet a bag. The calculator above does this for any number of beds at once.

How many bags of mulch are in a cubic yard?

A cubic yard is 27 cubic feet, so it is 13.5 bags at 2 cubic feet, 18 bags at 1.5 cubic feet, 9 bags at 3 cubic feet, or 27 bags at 1 cubic foot. The 2 cubic foot bag is the common US size, and the half bag is exactly where people miscount — you cannot buy 13.5, so a yard is 14 bags with a little left over.

How deep should mulch be?

Two to three inches for most beds, and three to four inches where you are actively suppressing weeds. Deeper than four inches starts to hold water against stems and keeps rain from reaching the roots. Around trees, keep it clear of the trunk entirely rather than piling it up against the bark.

How much does a yard of mulch cover?

At 3 inches deep, one cubic yard covers 108 square feet. At 2 inches it covers 162 square feet, and at 4 inches, 81 square feet. Those figures are exact arithmetic, not estimates: the area is 27 cubic feet divided by the depth in feet.

Should I buy mulch in bags or in bulk?

Bulk is cheaper per cubic yard, but it carries a flat delivery fee, and that fee is the real decision. Below roughly two or three yards the delivery charge usually outweighs the saving, so bags win. Above that, bulk pulls ahead quickly. Enter both prices in the calculator above and it will do the comparison for your actual quantity.

How much does a yard of mulch weigh?

Between roughly 400 and 800 pounds for wood mulch, depending on the material and how wet it is. That spread is real rather than vague: dry shredded hardwood is near the bottom of it, and the same yard after a week of rain is near the top. Rubber mulch is heavier again. Check the weight before loading a half-ton pickup.

Does the calculator handle beds that are not rectangles?

Yes. Choose circle for a tree ring, ring or border for a mulched edge around a lawn or patio, triangle for a corner bed, or enter a square footage directly if you have already measured it. Each bed keeps its own shape and its own depth, and the totals add up across all of them.

Can I save or share my plan?

Your whole project lives in the page's address, so copying the link saves it. Send it to yourself, open it on your phone at the garden centre, or bookmark it and come back next season. Nothing you type is uploaded — the link is built in your browser and the calculation runs there too.

Keep reading